Our facility is serviced by six overhead cranes, with a lifting capacity up to 15 tons.
Horizontal Boring Mills (CNC)
| 5.9″ | Toshiba | 180″ Horiz | x | 90″ Vert | w/ 38 ATC |
| 5.1″ | Toshiba | 160″ | x | 90″ | w/ 38 ATC, R. Angle Head |
| 5.1″ | Toshiba | 160″ | x | 90″ | w/ 38 ATC, R. Angle Head |
| 5.1″ | Toshiba | 118″ | x | 90″ | w/ 90 ATC & full “B”axis |
| 4.3″ | Toshiba | 78″ | x | 59″ | w/ 60 ATC & full “B”axis |
| 4.3″ | Doosan | 98.4″ | x | 78.7″ | w/ 60 ATC & full “B”axis |
Vertical Boring Mills (CNC)
| Toshiba | 78″ table | 90.5″ swing | x | 59″ cutting height, CNC, 12 ATC |
(We use SURFCAM 7.0 programming and are able to receive DXF, IGES, PDF,TIF, DWG files, and more)
Horizontal Boring Mills (table type – D.R.O.)
| 5″ | Giddings & Lewis | 132″ | x | 96″ |
| 4″ | Giddings & Lewis | 60″ | x | 48″ |
Planer Mill
| Ingersoll | 315″ x 90″ x 72″ |
(3) Milling Heads: Top, Side, Right Angle
Inspection Department
- 8′ X 14′ Granite Inspection Table
- Quantum Faro Arm CMM with Probe and Laser Scanning
- 55″ Mitutoyo Computer Linear Height Gauge
- Hamar Laser Aligning System
- Complete Compliment of Calibrated Measuring Gauges
